RAM is the most crucial part of a computer. With good RAM quality, you can run your PC smoothly and get done with your work faster. For a gamer, RAM is pretty important for computers. It determines how quickly the game will load and how flawlessly the processor will work.
What happens when the RAM dies? It’s a disaster! Without RAM, the computer won’t work.
Is there a way to revive a damaged RAM? Well, in this article we are going to teach you how to fix dead RAM.
Read every step carefully. If you follow the steps and succeed, you can save a lot of money on repairs. The following steps require using heat and petrol. If you are underage, seek help from an older person.
Also, even though the steps are easy. If you are not confident enough, please do not proceed to perform any of it. Take the RAM to a repair shop to fix it from an expert.
How to Fix Dead RAM
After your RAM is all clean and tidy, it’s time to fix it. A new RAM will cost a lot, and if you’re on a tight budget, this will help you save a lot of money.
There are some things you’ll need before operating the following step.
- Heating gun.
- Foil paper.
- Electric oven.
If you have these three components, you’re good to go.
Step 1
Pre-heat your oven with the lowest heat settings. Remember, do not use a Microwave in any case. Using a microwave oven can damage the circuit board RAM, and you will lose the chances of fixing it.
Step 2
Take a nice sheet of aluminum foil paper. Now, keep the clean RAM on top of the foil. Wrap the RAM neatly and ensure that it’s adequately covered.
Step 3
When you are preheating your oven, it’s time for you to bake the RAM. Before baking, make sure to check the wrapping. You should cover the RAM fully before putting it in the oven.
Step 4
After putting the RAM in the preheated oven, bake it for 4 to 5 minutes.
After baking the RAM, let it cool down entirely before installing it on the computer.
After completing the steps, you should run the RAM on your computer without any issues.
If you are afraid to perform these steps, we have prepared another easy set of steps for you. Down below, we have given a straightforward guide on how to fix a dead RAM with a heating gun.
Step 1
First of all, plug in the cord and heat your heating gun. Let the gun heat decently for a few minutes.
Step 2
Now, slowly heat the RAM with the heated gun. Be gentle steady while doing the task. If you don’t be soft enough, the RAM can face damage easily.
Step 3
After treating the RAM with the heated gun, it’s time to let the RAM cool down. After the RAM is cooled down, install it on your PC.
Cleaning is Important
Before fixing any voltaic appliances, you need to clean them properly. Typically, dirt and dust can also be a reason for abolishing electronic devices.
It’s essential to clean the dusty RAM before fixing it. You will need some cheap products to cleanse your RAM.
- Fresh towel.
- Cotton-tipped swab/brush.
- Thinner/petrol.
- Spotless pencil eraser.
After you have arranged everything, we need to purify the RAM we can jump to the main steps.
Step 1
You must be cautious here. To clean your RAM, you have to unclip it from the slot and wash it gently. Remember, don’t be rigid on the RAM in any way.
Step 2
After cleansing the RAM, gently keep it on a clean towel. Do not rub it with the towel. Just keep it there and let the towel soak excess water. Let’s move to the next step, shall we?
Step 3
Look closely. Do you see the gold-colored bars? Those are made of real gold! Okay, we have work to do. Take a new eraser for the sake of safety. Rub the eraser lightly on those gold bars. Make sure to be super gentle.
Step 4
After rubbing the gold bars with an eraser, it’s time to move to the final step of cleaning.
Take a cotton swab and dip it into petrol or thinner. Carefully cleanse the RAM with light strokes. It’s best to eliminate the excess thinner /petrol on a tissue before cleaning the RAM.
Is it Going to Work?
Now, this is a vague matter. We can’t promise you that these two methods are going to work for everyone or not.
Sometimes, the RAM can get damaged critically. For critical cases, it is better to take the RAM to a specialist for the best result.
If the RAM slot has minor issues, these two heating methods will work if done correctly.
How to keep RAM Clean?
If you keep your computer, it will eliminate the chances of damage to the computer parts.
To keep the slots clean and tidy, you need to follow some simple things. First, you should get a case that covers the pc adequately.
Twice a week, turn off your pc and keep it like that for an hour. Open the casing and dust off the parts gently with a not too harsh brush. If you can find a 95% alcohol solution, take a cotton swab and softly clean the RAM after the cleaning, let it dry entirely, and assemble the computer.
Conclusion
In this article, we have answered the topic of how to fix a dead RAM. We have experimented and tried the methods before handing over the solution to you. We hope we could help you with this essay today. Thank you so much for reading the article. As always, have a fantastic day